• 1 x 61cm basin wash stand chrome (T23A CHR)
• 1 x Victorian basin 610mm 1TH (B3 1TH)
• 1 x Close coupled pan (P5)
• 1 x Medium level flush pipe kit including medium ornate brackets in chrome (T33 CHR)
• 1 x Close Coupled / Low level cistern 51cm Ceramic Lever (incl. bottom entry cistern fittings) (C1)

Technical Specification

Chrome Washstand Basin- 1TH- Height- 840mm, Width- 610mm, Length- 510mm

Toilet- Height- 1420mm, Width- 510mm, Length- 730mm

Additional Information

• The medium level wc uses a standard close coupled pan and close coupled cistern, connected with a medium level flush pipe kit T33 CHR
• The distance from the wall to the soil pipe is fixed and cannot be extended, except by using the extended depth cistern C30 ( this moves the pan an extra 30mm forwards)
• The cistern height can be varied by cutting the vertical flush pipe to length - maximum height is 1,425mm to the top of the cistern, minimum height is1,125mm.
• Water Inlet valve hole is located on the base of cistern tank on the right hand side
• Bottom inlet valve (SP5A). Back inlet valve available as optional item (SP511). SP511 : Back entry kit for C1/C3/C24, including back entry inlet valve with flexible hose and plug
• Dual flush cistern fittings with ceramic lever on the right. Press lever down for 6 litre flush and up for 3 litre flush.
• P trap standard height pan - height from floor to pan rim is 40cm. Ceramic soil connection pipes : straight connector to the wall : C29. The S trap connector bending down to the floor : C26
• Cistern can be used with optional decorative Ornate Brackets T32 CHR Medium level wc must be used with standard Burlington toilet seats.